Rainbow-electronics DS1372 Bedienungsanleitung PDF herunterladen (Seite 3)

DS1372

_______________________________________________________________________________________ 3

Note 1: Limits at -40°C are guaranteed by design and not production tested.

Note 2: All voltages are referenced to ground.

Note 3: SCL clocking at maximum frequency = 400kHz.

Note 4: Specified with I

C bus inactive, SCL = SDA = V

Note 5: Measured with a 32.768kHz crystal attached to the X1 and X2 pins.

Note 6: The I

C minimum operating frequency is imposed by the requirement of timeout period.

Note 7: The first clock pulse is generated after this period.

Note 8: A device must internally provide a hold time of at least 300ns for the SDA signal (referred to as the V

IHMIN

of the SCL sig-

nal) to bridge the undefined region of the falling edge of SCL.

Note 9: The maximum t

HD:DAT

must only be met if the device does not stretch the low period (t

LOW

) of the SCL signal.

Note 10: A fast-mode device can be used in a standard-mode system, but the requirement t

SU:DAT

≥ 250ns must then be met.

This is automatically the case if the device does not stretch the low period of the SCL signal. If such a device does stretch

the low period of the SCL signal, it must output the next data bit to the SDA line t

R(MAX)

+ t

SU:DAT

= 1000 + 250 = 1250ns

before the SCL line is released.

Note 11: C

= Total capacitance of one bus line in pF.

Note 12: The parameter t

OSF

is the period of time the oscillator must be stopped for the OSF flag to be set over the voltage range of

2.4V ≤ V

≤ V

CC(MAX)

Note 13: The DS1372 can detect any single SCL clock held low longer than T

_TIMEOUT

(MIN). The I

C interface is in reset state and

can receive a new START condition when SCL is held low for at least T

_TIMEOUT

(MAX). Once the part detects this condi-

tion the SDA output is released. The oscillator must be running for this function to work.

ELECTRICAL CHARACTERISTICS (continued)

= 2.4V to 5.5V, T

= -40°C to +85°C, unless otherwise noted.) (Note 1)

PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS

Fast mode 100

Data Setup Time (Note 10) t

SU:DAT

Standard mode 250

Fast mode

20 +

0.1C

300

Rise Time of SDA and SCL

Signals (Note 11)

Standard mode

20 +

0.1C

1000

Fast mode

20 +

0.1C

300

Fall Time of SDA and SCL Signals

(Note 11)

Standard mode

20 +

0.1C

300

Fast mode 0.6

Setup Time for STOP Condition t

SU:STO

Standard mode 4.0

μs

Capacitive Load for Each Bus

Line (Note 11)

400 pF

I/O Capacitance C

I/O

10 pF

SCL Spike Suppresion TSP 30 ns

Oscillator Stop Flag (OSF) Delay

(Note 12)

OSF

100 ms

Timeout Interval (Note 13) T

_TIMEOUT

25 35 ms

CRYSTAL SPECIFICATIONS

PARAMETER SYMBOL MIN TYP MAX UNITS

Nominal Frequency f

32.768 kHz

Capacitive Load C

12.5 pF

Equivalent Series Resistance ESR 50 k

C, 32-Bit, Binary Counter Clock with 64-Bit ID

1 2 3 4 5 6 7 8 ... 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Rainbow-electronics DS1372 Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Rainbow-electronics DS1372