Rainbow-electronics MAX783 Bedienungsanleitung PDF herunterladen (Seite 7)

MAX783

Triple-Output Power-Supply Controller

for Notebook Computers

_______________________________________________________________________________________ 7

NAME FUNCTION

1 ON3 ON/O

—

–

control input to disable the +3.3V PWM. Tie directly to VL for automatic start-up.

2 S

—

–

______________________________________________________________Pin Description

3 D1

4 D2 #2 level-translator/comparator noninverting input (see D1).

8 R

—

–

7 Q1 #1 level translator/comparator output (see Q2).

6 Q2

5 VH External positive supply voltage input for the level translators/comparators and R

—

–

output.

19 ON5 ON/O

—

–

control input to disable the +5V PWM supply. Tie to VL for automatic start-up.

PCMCIA digital control inputs with industry-standard coding (see Table 1).

14 SYNC

13 REF

12 GND Low-current analog ground. Feedback reference point for all outputs.

11 VPPB 0V, 3.3V, 5V, 12V switchable PCMCIA VPP output. Sources 60mA. Controlled by DB0 and DB1.

10 VDD

9 VPPA 0V, 3.3V, 5V, 12V switchable PCMCIA VPP output. Sources 60mA. Controlled by DA0 and DA1.

20 SS5 Soft-start control input for +5V. Ramp time to full current limit is 1ms/nF of capacitance to GND.

21 CS5 Current-sense input for +5V. Current limit level is +100mV referred to FB5.

22 DH5 Gate-drive output for the +5V high-side MOSFET.

23 LX5 Inductor connection for the +5V supply.

24 BST5 Boost capacitor connection for the +5V supply (0.1µF).

25 DL5 Gate-drive output for the +5V low-side MOSFET.

26 PGND Power ground

15-18

27 FB5 Feedback and current-sense input for the +5V PWM.

29 V+ Supply voltage input from battery, 5.5V to 30V

28 VL 5V logic supply voltage for internal circuitry. VL is always on and can source 5mA for external loads.

33 DH3 Gate-drive output for the +3.3V high-side MOSFET.

32 LX3 Inductor connection for the +3.3V supply.

31 BST3 Boost capacitor connection for the +3.3V supply (0.1µF).

30 DL3 Gate-drive output for the +3.3V low-side MOSFET.

36 SS3 Soft-start input for +3.3V. Ramp time to full current limit is 1ms/nF of capacitance to GND.

35 CS3 Current-sense input for +3.3V, current limit level is +100mV referred to FB3.

34 FB3 Feedback and current-sense input for the +3.3V PWM.

DA1, DA0,

DB1, DB0

Shutdown control input, low-true logic. Tie to VL for automatic start-up. The 5V VL supply stays active in

shutdown. Don't force S

—

–

higher than VL + 0.5V.

#2 level-translator/comparator output. Sources 20µA from VH when D2 is high. Sinks 500µA to GND when

D2 is low, even with VH = 0V.

Power-good indication for the main +5V supply. Low indicates greater than 4.5V at the +5V output.

Swings 0V to VH.

+15V flyback input (feedback). A weak shunt regulator conducts 3mA to GND when VDD exceeds 19V.

VDD serves as the supply input for the VPP linear regulators.

3.3V reference output sources up to 5mA for external loads. Bypass to GND with 1µF/mA of load or

0.22µF minimum

Oscillator control/synchronization input. Connect to VL or GND for 200kHz; connect to REF for 300kHz.

For external clock synchronization in the 240kHz to 350kHz range, a high-to-low transition starts a new cycle.

#1 level-translator/comparator noninverting input, threshold = +1.650V. Controls Q1. Tie to GND if

unused.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Rainbow-electronics MAX783 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Rainbow-electronics MAX783