Rainbow-electronics MAX3798 Bedienungsanleitung Seite 2

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 35
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 1
MAX3798
1.0625Gbps to 10.32Gbps, Integrated, Low-
Power SFP+ Limiting Amplifier and VCSEL Driver
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= 2.85V to 3.63V, T
A
= -40°C to +85°C, CML receiver output load is AC-coupled to differential 100Ω, C
AZ
= 1nF, transmitter out-
put load is AC-coupled to differential 100Ω (see Figure 1), typical values are at +25°C, V
CC
= 3.3V, I
BIAS
= 6mA, I
MOD
= 6mA, unless
otherwise specified. Registers are set to default values unless otherwise noted, and the 3-wire interface is static during measure-
ments. For testing, the MODE_SEL bit was used and the MSEL pin was left open.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
CCR
, V
CCT
, V
CCD
.................................................-0.3V to +4.0V
Voltage Range at DISABLE, SDA, SCL,
CSEL, MSEL, FAULT, BMON, LOS,
BMAX, MMAX, CAZ2...............................-0.3V to (V
CC
+ 0.3V)
Voltage Range at ROUT+, ROUT- .....(V
CC
- 1V) to (V
CC
+ 0.3V)
Voltage at TIN+, TIN-........................(V
CC
- 2.5V) to (V
CC
- 0.5V)
Voltage Range at TOUT+, TOUT- ......(V
CC
- 2V) to (V
CC
+ 0.3V)
Voltage at BIAS...............................................................0 to V
CC
Voltage at RIN+, RIN-..........................(V
CC
- 2V) to (V
CC
- 0.2V)
Current Range into FAULT, LOS...........................-1mA to +5mA
Current Range into SDA........................................-1mA to +1mA
Current into ROUT+, ROUT- ...............................................40mA
Current into TOUT+, TOUT- ................................................60mA
Continuous Power Dissipation (T
A
= +70°C)
32-Pin TQFN (derate 34.5W/°C above +70°C) ...........2759mW
Operating Junction Temperature Range...........-55°C to +150°C
Storage Temperature Range .............................-65°C to +160°C
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
POWER SUPPLY
Power-Supply Current
I
CC
Includes the CML output current;
excludes I
BIAS
= 6mA, I
MOD
= 6mA,
V
DIFF_ROUT
= 400mV
P-P
(Note 1)
97 150 mA
Power-Supply Voltage V
CC
2.85 3.63 V
GENERAL
Input Data Rate 1.0625 10.32 Gbps
Input/Output SNR 14.1
BER 10E-12
POWER-ON RESET
High POR Threshold 2.55 2.75 V
Low POR Threshold I
BIAS
= I
BIASOFF
and I
MOD
= I
MODOFF
2.3 2.45 V
Rx INPUT SPECIFICATIONS
Differential Input Resistance
RIN+/RIN-
R
IN_DIFF
75 100 125
MODE_SEL = 0 at 4.25Gbps 2 4
Input Sensitivity (Note 2) V
INMIN
MODE_SEL = 1 at 8.5Gbps 3 8
mV
P-P
Input Overload V
INMAX
1.2 V
P-P
DUT is powered on, f 5GHz 14
Input Return Loss SDD11
DUT is powered on, f 16GHz 7
dB
DUT is powered on, 1GHz < f 5GHz 8
Input Return Loss SCC11
DUT is powered on, 1GHz < f 16GHz 8
dB
Rx OUTPUT SPECIFICATIONS
Differential Output Resistance R
OUTDIFF
75 100 125
DUT is powered on, f 5GHz 11
Output Return Loss SDD22
DUT is powered on, f 16GHz 5
dB
Seitenansicht 1
1 2 3 4 5 6 7 ... 34 35

Kommentare zu diesen Handbüchern

Keine Kommentare