Rainbow-electronics MAX9395 Bedienungsanleitung PDF herunterladen

General Description

The MAX9394/MAX9395 consist of a 2:1 multiplexer

and a 1:2 demultiplexer with loopback. The multiplexer

section (channel B) accepts two low-voltage differential

signaling (LVDS) inputs and generates a single LVDS

output. The demultiplexer section (channel A) accepts

a single LVDS input and generates two parallel LVDS

outputs. The MAX9394/MAX9395 feature a loopback

mode that connects the input of channel A to the output

of channel B and connects the selected input of chan-

nel B to the outputs of channel A.

Three LVCMOS/LVTTL logic inputs control the internal

connections between inputs and outputs, one for the

multiplexer portion of channel B (BSEL), and the other

two for loopback control of channels A and B (LB_SELA

and LB_SELB). Independent enable inputs for each dif-

ferential output pair provide additional flexibility.

Fail-safe circuitry forces the outputs to a differential low

condition for undriven inputs or when the common-

mode voltage exceeds the specified range. The

MAX9394 provides high-level input fail-safe detection

for HSTL, LVDS, and other GND-referenced differential

inputs. The MAX9395 provides low-level fail-safe detec-

tion for CML, LVPECL, and other V

-referenced differ-

ential inputs.

Ultra low 91ps

P-P

(max) pseudorandom bit sequence

(PRBS) jitter ensures reliable communications in high-

speed links that are highly sensitive to timing error,

especially those incorporating clock-and-data recovery,

or serializers and deserializers. The high-speed switch-

ing performance guarantees 1.5GHz operation and less

than 87ps (max) skew between channels.

LVDS inputs and outputs are compatible with the

TIA/EIA-644 LVDS standard. The LVDS outputs drive

100Ω loads. The MAX9394/MAX9395 are offered in 32-

pin TQFP and 28-pin thin QFN packages and operate

over the extended temperature range (-40°C to +85°C).

Applications

High-Speed Telecom/Datacom Equipment

Central Office Backplane Clock Distribution

DSLAM

Protection Switching

Fault-Tolerant Systems

Features

♦ Guaranteed 1.5GHz Operation with 250mV

Differential Output Swing

♦ Simultaneous Loopback Control

♦ 2ps

(RMS)

(max) Random Jitter

♦ AC Specifications Guaranteed for 150mV

Differential Input

♦ Signal Inputs Accept Any Differential Signaling

Standard

♦ LVDS Outputs for Clock or High-Speed Data

♦ High-Level Input Fail-Safe Detection (MAX9394)

♦ Low-Level Input Fail-Safe Detection (MAX9395)

♦ +3.0V to +3.6V Supply Voltage Range

♦ LVCMOS/LVTTL Logic Inputs

MAX9394/MAX9395

2:1 Multiplexers and 1:2 Demultiplexers with

Loopback

________________________________________________________________ Maxim Integrated Products 1

Ordering Information

0.1µF 0.01µF

+3.0V TO

+3.6V

OUTA0

LVDS

RECEIVER

INA

ENA0

ENA1

ENB

GNDGND GNDGND

OUTA1

OUTB

LVCMOS/LVTTL

LOGIC INPUTS

LB_SELA

LB_SELB

BSEL

INB0

100Ω

= 50Ω

MAX9394

MAX9395

INB1

= 50Ω

100Ω

= 50Ω

Typical Operating Circuit

19-2878; Rev 0; 7/03

For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at

1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PART TEMP RANGE PIN-PACKAGE

MAX9394EHJ -40°C to +85°C 32 TQFP

MAX9394ETI* -40°C to +85°C 28 Thin QFN

MAX9395EHJ -40°C to +85°C 32 TQFP

MAX9395ETI* -40°C to +85°C 28 Thin QFN

*Future product—contact factory for availability.

Pin Configurations and Functional Diagram appear at end

of data sheet.

1 2 3 4 5 6 ... 12 13

MAX9394/MAX9395 1
Loopback 1

Inhaltsverzeichnis

Seite 1 - Loopback

General DescriptionThe MAX9394/MAX9395 consist of a 2:1 multiplexerand a 1:2 demultiplexer with loopback. The multiplexersection (channel B) accepts t

Seite 2

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback10 ________________________________________________________________________________

Seite 3

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback___________________________________________________________________________________

Seite 4

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback12 ________________________________________________________________________________

Seite 5

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopbackMaxim cannot assume responsibility for use of any circuitry other than circuitry en

Seite 6

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback2 _________________________________________________________________________________

Seite 7

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback___________________________________________________________________________________

Seite 8

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback4 _________________________________________________________________________________

Seite 9

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback___________________________________________________________________________________

Seite 10

MAX9394/MAX9395Detailed DescriptionThe LVDS interface standard provides a signalingmethod for point-to-point communication over a con-trolled-impedanc

Seite 11

back function. The loopback function routes the input ofchannel A to the output of channel B, and the inputs ofchannel B to the outputs of channel A.

Seite 12

MAX9394/MAX93952:1 Multiplexers and 1:2 Demultiplexers withLoopback8 _________________________________________________________________________________

Seite 13

Balanced cables such as twisted pair offer superiorsignal quality and tend to generate less EMI due tocanceling effects.Board LayoutUse a four-layer p

Kommentare zu diesen Handbüchern

Keine Kommentare

Rainbow-electronics MAX9395 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Schalttafel Rainbow-electronics MAX9395 herunter. Rainbow Electronics MAX9395 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schalttafel Rainbow-electronics MAX9395