Rainbow-electronics AT89LP214 Bedienungsanleitung PDF herunterladen (Seite 22)

3538A–MICRO–7/06

AT89LP213/214 [Preliminary]

13. I/O Ports

The AT89LP213/214 can be configured for between 9 and 12 I/O pins. The exact number of I/O

pins available depends on the clock and reset options as shown in Table 13-1. All port pins are

5V tolerant, that is they can be pulled up or driven to 5.5V even when operating at a lower V

such as 3V.

13.1 Port Configuration

All port pins on the AT89LP213/214 may be configured to one of four modes: quasi-bidirectional

(standard 8051 port outputs), push-pull output, open-drain output, or input-only. Port modes may

be assigned in software on a pin-by-pin basis as shown in Table 13-2. The Tristate-Port User

Fuse determines the default state of the port pins. When the fuse is enabled, all port pins default

to input-only mode after reset. When the fuse is disabled, all port pins, with the exception of P1.0

and P1.1, default to quasi-bidirectional mode after reset and are weakly pulled high. Each port

pin also has a Schmitt-triggered input for improved input noise rejection. During Power-down all

the Schmitt-triggered inputs are disabled with the exception of P1.3, P3.2 and P3.3, which may

be used to wake up the device. Therefore P1.3, P3.2 and P3.3 should not be left floating during

Power-down

Table 12-4.

IPH – Interrupt Priority High Register

IPH = B7H Reset Value = X000 0000B

Not Bit Addressable

–

PGH PSH PT1H PX1H PT0H PX0H

Bit76543210

Symbol Function

PGH General-purpose Interrupt Priority High

PSH Serial Port Interrupt Priority High

PT1H Timer 1 Interrupt Priority High

PX1H External Interrupt 1 Priority High

PT0H Timer 0 Interrupt Priority High

PX0H External Interrupt 0 Priority High

Table 13-1. I/O Pin Configurations

Clock Source Reset Option Number of I/O Pins

External Crystal or Resonator

External RST

Pin 9

No external reset 10

External Clock

External RST

Pin 10

No external reset 11

Internal RC Oscillator

External RST

Pin 11

No external reset 12

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Rainbow-electronics AT89LP214 Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sensoren Rainbow-electronics AT89LP214