
34 Rev.A - May 17, 2001
Preliminary
T89C51CC02
9.5. Registers
EECON (S:0D2h)
EEPROM Control Register
Reset Value= XXXX XX00b
Not bit addressable
Figure 18. EECON Register
7 6 5 4 3 2 1 0
EEPL3 EEPL2 EEPL1 EEPL0 - - EEE EEBUSY
Bit Number Bit Mnemonic Description
7-4 EEPL3-0
Programming Launch command bits
Write 5Xh followed by AXh to EEPL to launch the programming.
3-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
2-
Reserved
The value read from this bit is indeterminate. Do not set this bit.
1 EEE
Enable EEPROM Space bit
Set to map the EEPROM space during MOVX instructions (Write in the column latches)
Clear to map the ERAM space during MOVX.
0 EEBUSY
Programming Busy flag
Set by hardware when programming is in progress.
Cleared by hardware when programming is done.
Can not be set or cleared by software.
Kommentare zu diesen Handbüchern