
DS1857
Register Map
A description of the registers is below. The registers
are read only (R) or read/write (R/W). The R/W registers
are writable only if write protect has not been asserted
(see the Memory Description section).
Dual Temperature-Controlled Resistors with
External Temperature Input and Monitors
12 ____________________________________________________________________
(hex)
NAME OF LOCATION FUNCTION
00 to 7F EEPROM
MEMORY
LOCATION
(hex)
EEPROM/
SRAM
R/W
SETTING
NAME OF LOCATION
R/W
TMPlimhi (MSB to LSB)
Contains upper limit settings for temperature.
If the limit is violated, a flag in Main Device
byte 70h is set.
02 to 03 EEPROM
R/W
TMPlimlo (MSB to LSB)
Contains lower limit settings for temperature. If
the limit is violated, a flag in Main Device byte
70h is set.
04 to 07 EEPROM R 00 Reserved —
08 to 09 EEPROM
R/W
V
CC
limhi (MSB to LSB)
Contains upper limit settings for V
CC
. If the
limit is violated, a flag in Main Device byte 70h
R/W
V
CC
limlo (MSB to LSB)
Contains lower limit settings for V
CC
. If the
limit is violated, a flag in Main Device byte 70h
is set.
0C to 0F EEPROM — 00 Reserved —
10 to 11 EEPROM
R/W
MON1limhi (MSB to LSB)
Contains upper limit settings for MON1. If the
limit is violated, a flag in Main Device byte 70h
R/W
MON1limlo (MSB to LSB)
Contains lower limit settings for MON1. If the
limit is violated, a flag in Main Device byte 70h
is set.
14 to 17 EEPROM — 00 Reserved —
18 to 19 EEPROM
R/W
MON2limhi (MSB to LSB)
Contains upper limit settings for MON2. If the
limit is violated, a flag in Main Device byte 70h
R/W
MON2limlo (MSB to LSB)
Contains lower limit settings for MON2. If the
limit is violated, a flag in Main Device byte 70h
Main Device
Note: SRAM defaults are power-on defaults. EEPROM defaults are factory defaults.
Kommentare zu diesen Handbüchern