Rainbow-electronics MAX5295 Bedienungsanleitung Seite 21

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 33
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 20
MAX5290–MAX5295
Buffered, Fast-Settling, Dual, 12-/10-/8-Bit,
Voltage-Output DACs
______________________________________________________________________________________ 21
Default register values at power-up correspond to the
state of PU, e.g. input and DAC registers are set to
800hex if PU is floating, FFFhex if PU = DV
DD
, and
000hex if PU= DGND.
DAC Programming Examples:
To load input register A from the shift register, leaving
DAC register A unchanged (DAC output unchanged),
use the command in Table 3.
The MAX5290MAX5295 can load DAC register A from
the shift register, leaving input register A unchanged,
by using the command in Table 4.
To load input register A and DAC register A simultane-
ously from the shift register, use the command in Table 5.
For the 10-bit and 8-bit versions, set sub-bits = 0 for
best performance.
Advanced Feature
Programming Commands
Refer to the Programmer’s Handbook for details.
Select Bits (MA, MB)
The select bits allow synchronous updating of any com-
bination of channels. The select bits command the
loading of the DAC register from the input register of
each channel. Set the select bit M_ = 1 to load the DAC
register _ with data from the input register _, where
_ is replaced with A or B depending on the selected
channel. Setting the select bit to M_ = 0 results in no
action for that channel (Table 6).
Table 3. Load Input Register A from Shift Register
Table 4. Load DAC Register A from Shift Register
Table 5. Load Input Register A and DAC Register A from Shift Register
Table 6. Select Command
DATA CONTROL BITS DATA BITS
DIN 0 0 0 0 D11 D10 D9 D8 D7 D6 D5 D4 D3/0 D2/0 D1/0 D0/0
DATA CONTROL BITS DATA BITS
DIN 0 0 0 1 D11 D10 D9 D8 D7 D6 D5 D4 D3/0 D2/0 D1/0 D0/0
DATA CONTROL BITS DATA BITS
DIN 0 0 1 0 D11 D10 D9 D8 D7 D6 D5 D4 D3/0 D2/0 D1/0 D0/0
DATA CONTROL BITS DATA BITS
DIN 1 1 1 0 0 0 X X X X X X X X MB MA
Table 7. Select Bits Programming Example
DATA CONTROL BITS DATA BITS
DIN111000XXXXXXXX10
X = Don’t care.
X = Don’t care.
Seitenansicht 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Kommentare zu diesen Handbüchern

Keine Kommentare