Rainbow-electronics ATmega128RFA1 Bedienungsanleitung Seite 146

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 524
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 145
146
8266A-MCU Wireless-12/09
ATmega128RFA1
This interrupt indicates a compare match on compare unit 3.
Bit 1 – IRQSCP2 - Compare Unit 2 Compare Match IRQ
This interrupt indicates a compare match on compare unit 2.
Bit 0 – IRQSCP1 - Compare Unit 1 Compare Match IRQ
This interrupt indicates a compare match on compare unit 1.
10.11.29 SCIRQM – Symbol Counter Interrupt Mask Register
Bit 7 6 5 4 3 2 1 0
NA ($DF) Res2 Res1 Res0 IRQMBO
IRQMOF
IRQMCP3
IRQMCP2
IRQMCP1
SCIRQM
Read/Write R R R RW RW RW RW RW
Initial Value 0 0 0 0 0 0 0 0
The Interrupt Mask Register is used to enable corresponding interrupts. After reset all
interrupts are disabled. Disabled interrupts are still captured in the interrupt status
register SCIRQS, but no interrupt is requested. Before enabling an interrupt, the
corresponding interrupt status bit should be cleared by writing a 1. If the status bit is set
and the IRQ gets enabled, the IRQ handler is called immediatly.
Bit 7:5 – Res2:0 - Reserved Bit
This bit is reserved for future use. The result of a read access is undefined. The register
bit must always be written with the reset value.
Bit 4 – IRQMBO - Backoff Slot Counter IRQ enable
This bit enables the SCNT_BACKOFF interrupt.
Bit 3 – IRQMOF - Symbol Counter Overflow IRQ enable
This bit enables the SCNT_OVFL interrupt.
Bit 2 – IRQMCP3 - Symbol Counter Compare Match 3 IRQ enable
This bit enables the SCNT_CMP3 interrupt.
Bit 1 – IRQMCP2 - Symbol Counter Compare Match 2 IRQ enable
This bit enables the SCNT_CMP2 interrupt.
Bit 0 – IRQMCP1 - Symbol Counter Compare Match 1 IRQ enable
This bit enables the SCNT_CMP1 interrupt.
Seitenansicht 145
1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 523 524

Kommentare zu diesen Handbüchern

Keine Kommentare