Rainbow-electronics ATmega128RFA1 Bedienungsanleitung Seite 448

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 524
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 447
448
8266A-MCU Wireless-12/09
ATmega128RFA1
Bit 4 – JTRF - JTAG Reset Flag
This bit is set if a reset is being caused by a logic one in the JTAG Reset Register
selected by the JTAG instruction AVR_RESET. This bit is reset by a Power-on Reset,
or by writing a logic zero to the flag.
29.7 Boundary-scan Description Language Files
Boundary-scan Description Language (BSDL) files describe Boundary-scan capable
devices in a standard format used by automated test-generation software. The order
and function of bits in the Boundary-scan Data Register are included in this description.
BSDL files are available for ATmega128RFA1.
29.8 ATmega128RFA1 Boundary-scan Order
Table 29-1 on page 449 shows the Scan order between TDI and TDO when the
Boundary-scan chain is selected as data path. Bit 0 is the LSB; the first bit scanned in,
and the first bit scanned out. The scan order follows the pin-out order. In Figure 29-3 on
page 445, PXn. Data corresponds to FF0, PXn. Control corresponds to FF1, PXn. Bit 4,
5, 6 and 7 of Port F is not in the scan chain, since these pins constitute the TAP pins
when the JTAG is enabled.
Seitenansicht 447
1 2 ... 443 444 445 446 447 448 449 450 451 452 453 ... 523 524

Kommentare zu diesen Handbüchern

Keine Kommentare