
296
8266A-MCU Wireless-12/09
Register Bits Value Description
0x8 PWM, Phase and frequency correct, TOP =
ICRn
0x9 PWM, Phase and frequency correct, TOP =
OCRnA
0xA PWM, Phase correct, TOP = ICRn
0xB PWM, Phase correct, TOP = OCRnA
0xC CTC, TOP = OCRnA
0xD Reserved
0xE Fast PWM, TOP = ICRn
0xF Fast PWM, TOP = OCRnA
18.11.47 TCCR5B – Timer/Counter5 Control Register B
Bit 7 6 5 4 3 2 1 0
NA ($121) ICNC5 ICES5 Res WGM53 WGM52 CS52 CS51 CS50 TCCR5B
Read/Write RW RW R RW RW RW RW RW
Initial Value 0 0 0 0 0 0 0 0
• Bit 7 – ICNC5 - Input Capture 5 Noise Canceller
Timer/Counter5 has only limited functionality. It is not connected to any Input Capture
Pin. Therefore this bit has no meaningful function.
• Bit 6 – ICES5 - Input Capture 5 Edge Select
Timer/Counter5 has only limited functionality. It is not connected to any Input Capture
Pin. Therefore this bit has no meaningful function.
• Bit 5 – Res - Reserved Bit
This bit is reserved for future use. A read access always will return zero. A write access
does not modify the content.
• Bit 4:3 – WGM51:50 - Waveform Generation Mode
Combined with the WGM51:0 bits found in the TCCR5A Register, these bits control the
counting sequence of the counter, the source for maximum (TOP) counter value, and
what type of waveform generation to be used. Modes of operation supported by the
Timer/Counter unit are: Normal mode (counter), Clear Timer on Compare match (CTC)
mode, and three types of Pulse Width Modulation (PWM) modes. For more information
on the different modes see section "Modes of Operation". Note that Timer/Counter5 has
only limited functionality. It cannot be connected to any I/O pin.
Table 18-28 WGM5 Register Bits
Register Bits Value Description
0x0 Normal mode of operation
0x1 PWM, phase correct, 8-bit
0x2 PWM, phase correct, 9-bit
0x3 PWM, phase correct, 10-bit
0x4 CTC, TOP = OCRnA
0x5 Fast PWM, 8-bit
WGM51:50
0x6 Fast PWM, 9-bit
Kommentare zu diesen Handbüchern